We’ve been told to get the Nike Check-it-on-It-Yourself Nike checkerboarding shirt in the new Nike tee or tee-shirt season, but it’s not as easy as it sounds.
There are two main ways to do it.
Either you’ll have to cut the top half of your shirt, or you’ll want to cut it down to the exact size you want to wear it on your body.
Here’s what to do if you need to do both.
Cut the top of the shirt The easiest way to do this is to cut off the top part of your Nike checkershirt.
This is a good place to cut down the top section of your tee, but the real trick is to get a cut that fits well.
If your shirt is longer, you might have to trim it a little more.
There’s a simple trick that will help you achieve the best fit: Fold the fabric over so that the cut ends on both sides are facing up.
This creates a fold that gives you a flat, seamless surface to work with.
Next, take your shirt back to your machine and cut out a small triangle.
This triangle should measure 2 1/2 inches wide by 3 1/4 inches tall.
This will be the “checkerboard” of your jersey.
This means that the triangle is the part of the design that will be visible when you cut out the triangle.
You’ll need to measure this triangle on a scale of one to 10.
If you’re a little intimidated, it’s pretty simple to do.
Take the first half of the triangle (the triangle that you just cut) and cut it so that it’s about 1 1/8 inches wide and 4 inches tall (or roughly 1 inch for men and 1 inch or 1.5 inches for women).
Take the second half of this triangle (a triangle that will measure 2 inches wide at the widest point) and take the same number of cuts that you took on the first triangle (you’re making a triangle that measures 6 inches wide).
Now cut the second triangle out of the third triangle (another triangle that’s 1 inch wide).
You should have the checker board now.
You can cut this into strips or sections, or create custom ones for the occasion.
Cut out the checkers To get the best possible fit, start by cutting your shirt to size.
If the shirt you’re going to wear is long, start with a medium or smaller shirt.
If it’s short, start cutting out the top, middle, and bottom of your checkerboards shirt.
To see what size you’ll need, take a ruler and measure the length of the entire shirt you’ll be wearing.
You want to measure the width of your triangle to determine the size of your shirts checkers.
To find your correct size, look at the shirt and measure from the bottom of the armhole to the tip of the sleeve.
If this is too short, cut it off at the waistband or waistband.
To get your shirt size, cut your checkers to length and cut a triangle measuring 2 1